TOLL FREE: 800-288-6823  PHONE: 303-288-6823

Plastic Fume Hoods

 

Counter Top (CT) Fume Hoods

The Countertop Polypropylene Exhausted Fume Hood is designed for use in Trace Metals and High Acid Digestion Labs where a non-ferrous environment is paramount to achieving exacting results. Fixtures are available along with pre-plumbing to the customer’s specifications.

 

Some available features include, but are not limited to:

 

  • Constructed from 1/4”, 3/8”, 1/2” and 3/4” thick stress-relieved white polypropylene.
  • Interior (standard) and exterior (optional) access panels.
  • Front air foil at deck height
  • Counter balanced clear sliding polycarbonate sash
  • Counter balance encapsulated in polypropylene material
  • Optional sash materials available
  • Vapor sealed interior fluorescent light
  • Front panel mounted service valves
  • Standard sinks or integral sinks (optional)
  • Plumbing and electrical connections provided within hood
  • ASHRAE 110-1995 Tested
  • 100 FPM horizontal air barrier for personnel safety
  • Optional control panel with keyed On/Off switch
  • Base Cabinets optional

 

 

Exhausted Laminar Flow (ELF) Fume Hoods

The Laminar Flow Polypropylene Exhausted Fume Hood is designed to be both ASHRAE approved for operator safety and ISO Certified for part protection. The Laminar Flow Hood provides a downward flow of clean air over the work surface, protecting the “parts” located within the hood. Room air is pulled over the front lip and into the hood’s work surface, providing operator protection. Both the down flow and inflow of air are exhausted through the sump of the hood and out the rear exhaust plenum.

 

Some available features include, but are not limited to:

 

  • Constructed from 1/4”, 3/8”, 1/2” and 3/4” thick stress-relieved white polypropylene
  • Interior (standard) and exterior (optional) access panels.
  • Counter balanced clear sliding polycarbonate sash
  • Counter balance encapsulated in polypropylene material
  • Optional sash materials available
  • Vapor sealed interior fluorescent light
  • Front panel mounted service valves
  • Standard sinks or integral sinks (optional)
  • Plumbing and electrical connections provided within hood
  • ASHRAE 110-1995 Tested
  • Can meet Fed Spec 209 and ISO (optional), for contaminate control
  • 100 FPM horizontal air barrier for personnel safety
  • Product protection provided by Vertical Laminar Flow HEPA filtered air
  • Fully adjustable positive air blower(s)
  • Front access for HEPA Filter removal
  • Magnehelic gauge: for HEPA filter supply air
  • Optional control panel with keyed On/Off switch
  • Base Cabinet included, 2-door on 4’ & 5’, 3 door on 6’, 4 door on 8’hoods
  • Base Cabinets vented to hood plenum

 

 

Perchloric Fume Hoods

The Perchloric Acid Use Fume Hood is designed for use in Trace Metals and High Acid Digestion Labs where a non-ferrous environment is paramount to achieving exacting results. Fixtures are available along with pre-plumbing to the customer’s specifications.

Some available features include, but are not limited to:

 

  • Constructed from 1/4”, 3/8”, 1/2” and 3/4” thick stress-relieved white polypropylene.
  • Interior (standard) and exterior (optional) access panels.
  • Front air foil at deck height
  • Counter balanced clear sliding polycarbonate sash
  • Counter balance encapsulated in polypropylene material
  • Optional sash materials available
  • Vapor sealed interior fluorescent light
  • Front panel mounted service valves
  • Standard sinks or integral sinks (optional)
  • Plumbing and electrical connections provided within hood
  • ASHRAE 110-1995 Tested
  • 100 FPM horizontal air barrier for personnel safety
  • Optional control panel with keyed On/Off switch
  • Base Cabinets optional

 

 

Walk In (WI) Fume Hoods

The Walk In (WI) Polypropylene Exhausted Fume Hood is designed for use in Trace Metals and High Acid Digestion Labs where a non-ferrous environment is paramount to achieving exacting results. Fixtures are available along with pre-plumbing to the customer’s specifications.

 

Some available features include, but are not limited to:

 

  • Constructed from 1/4”, 3/8”, 1/2” and 3/4” thick stress-relieved white polypropylene.
  • Interior (standard) and exterior (optional) access panels.
  • Front air foil at deck height
  • Counter balanced clear sliding polycarbonate sash
  • Counter balance encapsulated in polypropylene material
  • Optional sash materials available
  • Vapor sealed interior fluorescent light
  • Front panel mounted service valves
  • Standard sinks or integral sinks (optional)
  • Plumbing and electrical connections provided within hood
  • ASHRAE 110-1995 Tested
  • 100 FPM horizontal air barrier for personnel safety
  • Optional control panel with keyed On/Off switch
  • Base Cabinets optional

 

(HLCB) Horizontal Laboratory Clean Benches

 

Polypropylene Horizontal Laboratory Clean Benches are designed for use in Trace Metals and High Acid Digestion Labs where a non-ferrous environment is paramount to achieving exacting results. Clean Benches provide part protection only and do not provide operator protection.

 

Standard features included, but are not limited to:

  • Constructed from 1/4”, 3/8”, 1/2” and 3/4” thick stress-relieved white polypropylene.
  • Vapor sealed interior fluorescent light
  • TECO-Westinghouse variable frequency drive
  • Easily accessible HEPA filter compartment
  • Optional Polypropylene base cabinets available in various configurations.

 

Optional Features:

  • Molded sinks in various sizes and styles
  • Custom, integral sinks
  • Flame Retardant Polypropylene Material

 

 

 

(VLCB) Vertical Laboratory Clean Benches

 

Polypropylene Vertical Laboratory Clean Benches are designed for use in Trace Metals and High Acid Digestion Labs where a non-ferrous environment is paramount to achieving exacting results. Fixtures are available along with pre-plumbing to the customer’s specifications.

 

Some available features include, but are not limited to:

 

  • Constructed from 1/4”, 3/8”, 1/2” and 3/4” thick stress-relieved white polypropylene.
  • Interior (standard) and exterior (optional) access panels.
  • Front air foil at deck height
  • Counter balanced clear sliding polycarbonate sash
  • Counter balance encapsulated in polypropylene material
  • Optional sash materials available
  • Vapor sealed interior fluorescent light
  • Front panel mounted service valves
  • Standard sinks or integral sinks (optional)
  • Plumbing and electrical connections provided within hood
  • ASHRAE 110-1995 Tested
  • 100 FPM horizontal air barrier for personnel safety
  • Optional control panel with keyed On/Off switch
  • Base Cabinets optional

 

 

 

 

© 2016 TFI / Inline Design Corp. | Contact Us